LRM-AS/LRM (Wall Mounted Back to Topics · LRM-AS/LRM Product Overview · How to wire LRM-AS and LRM · How to replace/reset. Evolve LRM-AS Series , Rel. Instructions. LRM-AS by Evolve Guest Controls Inclusion of the LRM-AS Wall Mounted Dimmer on the EHC Wireless. Scene Command Class. – Security Compatible – Supports the Powerlevel command. – Has automatic Static Update Controller (SUC) capability. LRM-AS.
Now I just need to finish installing the other dimmers. I took a look at them after you mentioned it. You need to determine accurately the function of each wire in order to install the switch safely. Smart Home, made easy. Thanks for the response. They are white lmr-as so they may be neutral wires.
Please login or register. If that is the case, then it should be rather easy to determine which of the two black wires is line using a circuit teste.
I often had to remove the yellow wire and trim the green wire in order to get them to fit. What the wiring diagram is telling you is that you need to provide a neutral wire to the switch and a neutral wire to the load. You are right about the twisted wires.
Ill evilve up a wire tester to figure out what the wires are. Since you are replacing an existing switch, you should not have to worry about running a neutral to the load because it is already in place. I removed the paint from the other wires but they are all black so I need to determine which one is line and which one is load.
I would appreciate any help that you guys can provide. In that case the other black wire is load.
The neutral isn’t usually wired to standard non Z-wave switches. The yellow wire is not needed, ltm-as if you want to have the equivalent of a 3-wire circuit. The Evolve switches are not complicated to wire, but with all the extra wires they take up a great deal of space in a switch box.
It seems to indicate that the evoove wire and blue wire both go to the load wire but the diagram also sesm to indicate that the white wire should be connected to a neutral wire.
If those twisted wires are neutrals, that’s where the white wire would connect, if they’re part of your light’s circuit.
I twisted the neutral wire from the dimmer in with the others and added a wire connector. Eovlve can’t really tell what wire colors you have because of the paint.
Did you miss your activation email? In my house, I usually had to run a new wire from the switch’s electrical box to the fixture the switch controlled so that I would have a neutral available for the switch.
Evolve LRM-AS – Wall Mounted Dimmer – White
I’ve attached images of the wires. The neutral wires were pig tailed together with a wire connector on the end. It seems to indicate that the white wire and blue wire both go to the load wire”. I figured it out.
I had to attach the neutral to the group of neutral wires. One is the ground and I assume the other two are the line and load but I am not sure. Have a look here. Home Help Search Login Register. The wiring diagrams for Evolve switches can be confusing. I initially tried to attach the dimmer to one of the wires lrm-ss the group of neutral wires.
Evolve has several names. You need a neutral usually white in the U.
Evolve Lrm-as 120 VAC 500-watt Wall Mount Dimmer
It also appears that you are fortunate to have a neutral wire already available for the switch. In one photo, I see several wires twisted together. The white wire connects to the neutral coming back from the load and returning to the load center breaker box. I’m anxious to get everything set up.
The dimmer has 4 wires, I attached an image of the lrm-aw diagram. My switch lrm-az only has 3 wires going to the current light switch. Evolve seems to be the brand name for ACT’s residential line of products.