Shop, read reviews, or ask questions about INTERLUX InterProtect® E Barrier Coat System at the official West Marine online store. Since , West. Buy Interlux YEKIT/QT Gray Interprotect E Epoxy Primer Kit, fluid_ounces: Automotive – ✓ FREE DELIVERY possible on eligible . InterProtect E is a two-part self priming epoxy designed to protect fiberglass boat hulls from water absorption and reduce the likelihood of gelcoat blisters.
Item s in your cart: Didn’t need to do that, it drys flat and you can see the overcoats easily. Interlux’s Micro-Plate formula creates an effective barrier against water permeation.
I found knterprotect to go on easy. Can I mix them, with the activator added in the appropriate ratio? You need to let the InterProtect cure completely and sand before applying the paint –you can’t use the thumbprint tacky method. The grey over white coats and vice versa made full coverage easy. Yuu should be fine with X layers ofbarrier coat followed by an antifouling.
Interlux InterProtect Barrier Coat Epoxy Primer | E E
Rick I would suggest you get one gallon kit in gray and one gallon kit in white. InterProtect E is a two-part self priming epoxy designed to protect fiberglass boat hulls from water absorption and reduce the integprotect of gelcoat blisters. It’s really a preference thing whether you want to apply Primocon or InterProtect to your sail drive. Saxe Point Yes. I cleaned hull and washed it every other day with clean water for a month.
This product will work out great, we have a lot of customers that use this product for this purpose. Two-part epoxy interprotec barrier with Micro-Plates Up to two weeks is allowed between coats of E Now available in two colors, Gray and White Fast drying, easy application Sag resistance to insure the elimination of sags and runs during application Technically, InterProtect Micro-Plates provide millions of overlapping microscopic plates that create a barrier similar to shingles on a roof.
For complete hull coverage calculate total surface area to be 20000e, then follow the division step. Turn the cans over and let them sit for a while before you use them.
Interlux Special Thinner. Put on two coats of anti foul. These overlapping Interptotect eliminate any direct path for water migration and also improve the sag resistance of the epoxy making application easier.
I have found it is better to go slowly, with very gentle pressure to reduce orange peal and roller lines. Troy Yes, use a good fairing compound, then a thinned Interprotect as a barrier coat, usually I use two thin coats, tint first one.
No need to add gelcoat again oncebarrier coat is inplace. Interlux Trilux 33 Antifouling Bottom Paint. 22000e Fiberglass Solvent Wash. Be sure to roll it on thick and to get good coverage.
Coating over epiglass on my blistered sailboat hull. It is also an excellent primer for all metals and can be used as part of a no sand system.
Interlux Watertite Epoxy Filler. Wasn’t sure if it had ever been done in the past. I’ve rolled it and sprayed it. Epoxy barrier coats tend to work out as great primers for things like spreaders and metals.
I would see what others have done, and in some cases the engine manufacturer has a recommendation based upon their experiences. Bob of gulf point Iterprotect Coating over epiglass on my blistered sailboat hull.
Water breaches the exterior gelcoat and reacts with the chemical components creating acidic substances.