Hello, I am looking for a solution how I can do a crossupdate for my Allnet + NAS to Thecus +. Allnet has stopped the support, and I. Applicable Models: ALL, ALLPRO, ALL, ALL, ALL ,. ALL, ALL and ALL Please read the notes below carefully. ALLNET ALL RAID 5 with x GB Seagate Barracuda drives ( Rebadged Thecus ). Fan failed causing it to overheat which triggered raid.
The folder cannot grow beyond this limit. Time Sets the system time.
Allnet ALLpro manual
Netmask Network mask, which is generally: Zone Specifies Zone for Applet Talk service. If you choose an on time, but do not assign an off time, the system will turn on and remain on until a scheduled off time is reached, or if the unit is shutdown manually.
Provides twice the read rate of single disks, but same write rate. It will be used for files backed up by Nsync.
Set the desired Date, Time, and Time Zone. Click Reboot to reboot without running the check.
Press Cancel to go back to the main menu. Disk Power Management The administrator can set the disk to power down after a period of inactivity. The more precies your question is, the higher the chances of quickly receiving an answer from another user.
It is highly recommended that users conduct necessary back-up practices. Model Displays the model of the USB printer. INFO Provides all log information including warning messages and error messages. System will turn off at There you will see the RAID volumes to run the file system check on. Information On the Disks Information screen, the status of each disk will be displayed in the Status column. Firmware version Shows the current firmware version.
From here, you can Enable or Allhet.
Choose your ALLNET product from list:
Select a group or user from this list. Language Choose your preferred language here.
Enable Displays whether the module has been enabled or not. This screen displays the network parameters of the WAN connection. To use USB copy, follow the steps below: In case of an error, please provide us with your feedback.
Login to the system using the administrator user name and password. Users with other operating systems will need to install the ALLNET Setup Wizard on a host machine with one of these operating systems before using the unit. If you replace all the drives with higher capacity drives, you will need to go to Administrator login and format the drives.
Reset Cancel your settings and return to the Folder screen. RAID 5 can sustain one failed disk. Previous page Next page. Any LED glows red. RAID 6 can sustain two failed disks. About This Manual All information in this manual has been carefully verified to ensure its correctness.
Once rebuilt, you can continue to replace any remaining disks in the RAID array. Description The description of the module.