Safety Glazing Compliance Testing Per CMVSS General Motors of Canada Ltd., Vehicles, Duplate Canada Ltd., Flat Tempered Safety Glass Type As-. Glazing Compliance Testing Per CMVSS General Motors of Canada: Lumina APV Chevrolet: AS1-DOT. Front Cover. Canada. Transport Canada. Surface. Safety Glazing Compliance Testing Per CMVSS Chrysler Canada Ltd.: Laminated Curved AS Dot Front Cover. Canada. Transport Canada. Surface.
Even though there are editorial changes, the technical requirements remain the same, thus the reference is being updated. This standard specifies requirements for glazing materials for use in motor vehicles and motor vehicle equipment. Transport Canada meets face-to-face with the two automotive manufacturing associations Canadian Vehicle Manufacturers Association and Global Automakers of Canada and the Motorcycle and Moped Industry Council at least twice a year to discuss current regulations and future regulatory planning.
Pickup cover means a camper having a roof and sides but without a floor, designed to be mounted on and removable from the cargo area of a truck by the user.
April 93 is incorporated by reference in Section S5. The purpose of this standard is to reduce injuries resulting from impact to glazing surfaces, to ensure a necessary degree of transparency in motor vehicle windows for driver visibility, and to minimize the possibility of occupants being thrown through the vehicle windows in collisions.
This amendment maintains the current Canadian requirement, which is harmonized with the U.
This caused confusion as it was expected that the UN Regulations were just for use by European countries. This amendment includes only minor updates to clarify the incorporations of cvmss referenced technical requirements and to allow alternative means of compliance that manufacturers may follow at their discretion. When a UN GTR is incorporated into the national safety regulations of individual contracting parties, it may be adapted to fit local needs and policies.
Camper means a structure designed to be mounted in the cargo area of a truck, or attached to an incomplete vehicle with motive power, for the purpose of providing shelter for persons.
Typically, UN regulations are aligned with new or amended UN GTR to assure that the two sources of international provisions for vehicle safety do not contradict each other. The Department and the Cmvsa States Department of Transportation hold semi-annual meetings to discuss issues of mutual importance and planned regulatory changes. The other UN regulation closely aligns with the current Canadian requirements.
Slide-in camper means a camper having a roof, floor, and sides, designed to be mounted on and removable from the cargo area of a truck by the user.
As this amendment does not include any new requirements, it has been completed without a prepublication for consultation.
InterRegs: CMVSS | Canada
If the odometer or trip odometer is not adjacent to the speedometer or switches between kilometres and miles independently of the speedometer, the odometer or trip odometer shall display distances in kilometres or miles and shall identify the unit of measure used.
These three UN regulations are already highly aligned with current Canadian standards; however, manufacturers currently need to meet both standards to certify vehicles in ckvss markets.
More details regarding the CETA, including the cooperation in the field of motor vehicle regulations, can be found at http: In general, the Department fmvss the automotive ckvss, public safety organizations, and the general public when changes are planned to the Motor Vehicle Safety Regulations. Only the tires installed on the vehicle at the time of initial vehicle sale may be used for testing. Small business lens The small business lens does not apply to this amendment, as there are no costs or insignificant costs on small business.
Motor home means a multipurpose passenger vehicle that provides living accommodations for persons. The Director of the Federal Register approved the material incorporated by reference in accordance with 5 U. The requirements of these two standards are closely aligned. Each of the UN regulations forms a treaty that the contracting party is obligated to introduce if it has a desire for mutual recognition of conformity testing.
As a result, there is growing pressure to align Canadian motor vehicle safety regulations with those of the United States, as well as with those of countries outside of North America.
Glass-plastic glazing material means a laminate of one or more layers of glass and one or more layers of plastic in which a plastic surface of the glazing faces inward when the glazing is installed in a vehicle.
The Department also consults regularly, in face-to-face meetings or teleconferences, with the automotive industry, public safety organizations, the provinces, and the territories.
United Nations Regulation No. Finally, minor corrections are needed in several other standards. This standard applies to passenger cars, multipurpose passenger vehicles, trucks, buses, motorcycles, slide-in campers, pickup covers designed to carry persons while in motion, and low speed vehicles, and to glazing materials for use in those vehicles.
Shade band areas for windshields shall comply with SAE J, rev. This amendment satisfies the negotiated terms of the CETA and ensures that all existing references to UN regulations and European standards are up to date. June 95 is incorporated by reference in Section S5.
The request must include the company name, address, and a statement from the manufacturer certifying its status as a prime glazing manufacturer as defined in S4.
This allows manufacturers to meet either United Nations or Canadian requirements. A copy of SAE J, rev. The small business lens does not apply to this amendment, as there are no costs or insignificant costs on small business. In mcvss to incorporating three new UN regulations, several references to existing UN and European standards require updates and minor clarifications.
Digital speedometers that switch between kilometres per hour and miles per hour are permitted if the unit of measure is identified.
FMVSS Federal Motor Vehicle Safety Standard Glazing
General 1 Every motorcycle, except those designed and sold exclusively for use by law enforcement agencies, shall conform to the requirements of Technical Standards Document No.
Harmonized regulations are key to trade and to a competitive Canadian automotive industry. At 67 FRDec. Both the UN and current Canadian standards include exceptions to the requirement that the ESC system must return to its default state at the initiation of a new ignition cycle.
However, if there is insufficient space to display the words or abbreviations identifying the ignition, tachometer or fuel tank shutoff valve in both official languages in a readily visible manner, they may be displayed in one official language only.
The Department also meets regularly with the federal authorities of other countries. Only the option of using the double integration method for determining lateral displacement would be accepted. This gives them the opportunity to comment on these changes by letter or email. Bullet resistant shield means a shield or barrier that is installed completely inside a motor vehicle behind and separate from glazing materials that independently comply with the requirements of this standard.
Prime glazing manufacturer means a manufacturer that fabricates, laminates, or tempers glazing materials. These consultations were open to all stakeholders and groups. For motor vehicles and glazing equipment manufactured before September 1,the manufacturer may, at its option, comply with 49 CFR