INTERGARD – GREY (GR3) – L (). Product Code:INTGRGL. Product Description: A two component, low VOC, high solids, fast curing epoxy. Intergard Epoxy Primer/Finish by International Paint – INTERGARD ULTRA DEEP BASE 1 GAL, VPN: AAA/1 for only $ Buy online or find out. Intergard _Datasheet – Download as PDF File .pdf), Text File .txt) or read online.
Call Send a quick message. When ontergard by methods other than airless spray, the required film build is unlikely to be achieved. Consult International Protective Coatings for further details. However, in non-aggressive, low corrosive environments such as those equating to C2 as per ISO part 2, it is acceptable to specify Intergard as a single coat at 3. Drying time before recoating: Press and move to zoom.
Once the unit has been itergard, it must be used within the working pot life specified. Akzonobel IntergardPackaging Size: Always mix a complete unit in the proportions supplied. Surface preparation All surfaces to be coated should be clean, dry and free from contamination. Low molecular weight reactive additives, which will form part of the film during normal ambient cure conditions, will also effect VOC values determined using EPA Method When applying Intergard in confined spaces, ensure adequate intergarr.
We as Exclusive Distributor obtain these products from the Worlds No 1 Paint Company Akzonobel, who ensure all the products are manufactured using high-grade ingredients with minimum human errors. Epoxy Zinc Rich Primer.
Akzonobel Intergard 345, Packaging Size: 20 L
Where a durable cosmetic finish with good gloss and color retention is required, overcoat with recommended topcoats. All surfaces should be clean, dry and free from curing compounds, release agents, trowelling intefgard, surface hardeners, efflorescence, grease, oil, dirt, old coatings and loose or disintegrating concrete. Driying time full curing: Epoxy Zinc Phosphate Primer in Vadodara.
Get in Touch with us Namit Enterprises.
When utilizing certain colors, particularly the darker shades via the Chromascan system where maximum intertard of colorants is required, it is necessary to allow an increase in the quoted drying and overcoating times.
Intergard provides a combination ofanti-corrosive barrier protection, chemical fume and spillage resistance, along with good abrasion resistance.
Concrete should be cured for a minimum of 28 days prior to coating. Drying iintergard dust free: Concrete, Pre-cast Blockwork, etc Intergard is suitable for application to concrete.
Our array is well known all across the market for their splendid features such as quality and efficiency. Intergard is suitable for application to blast cleaned surfaces which were initially to the above standard but have been allowed to deteriorate under good shop conditions for up to days. Varnish Hybrid Water base. Mouse over image to zoom. They have a team of dexterous professionals who has vast experience in this industry and hold expertise in their respective domain.
Drying time touch dry: VOC values are typical and are provided for guidance purpose only. Epoxy Zinc Rich Primer in Faridabad.
If oxidation has occurred between blasting and application of Intergard the surface should be reblasted to the specified visual standard. Epoxy Red Oxide Primer.
INTERGARD – GREY (GR3) – L ()
These may be subject to variation depending on factors such as differences in color and normal manufacturing tolerances.